+- STOC - FORUM (https://forum.teslaclub.ch)
+-- Forum: Deutsch (https://forum.teslaclub.ch/Forum-Deutsch)
+--- Forum: Tesla Energie & Solar (https://forum.teslaclub.ch/Forum-Deutsch-Tesla-Energie-Solar)
+--- Thema: Communication between Powerwall2 Gateway and Solaredge SE-15k inverter (/Thread-Deutsch-Tesla-Energie-Solar-Communication-between-Powerwall2-Gateway-and-Solaredge-SE-15k-inverter)
Communication between Powerwall2 Gateway and Solaredge SE-15k inverter - Alexandre Lechenne - 18.05.2020
Dear All,
I have an installation with 3 Powerwall2 batteries + Powerwall Gateway. My inverter is a Solaredge SE-15K. During the setup of the Powerwall, in installer mode, one ask to add the inverter. I found the Solaredge SE-15K, but there is a checkbox for the communication in order to set the IP address of the inverter. I got the address on the display of the inverter (192.168.1.107); I ping it, it's reachable. But when I try to check the communicaiton within the Powerwall setup, the test fails. Has anyone some experience with the IP communication beetween the Gateway and an inverter, especially the Solaredge models, and if possible the SE models?
Thanks and kind regards
RE: Communication between Powerwall2 Gateway and Solaredge SE-15k inverter - Alexandre Lechenne - 20.05.2020
Just one additional remark: despite this, the complete system is working fine as the Powerball gateway is measuring the current provided by the inverter through 3 CT (current transformers).